
Above image may be representative or a CAD rendering; see 3D model below for additional views.
PART NUMBER: KOR-S02-6
3D CAD model - KOR-S02-6 (6" Shock-Absorbing Swivel Caster, Zinc Bracket) Geometry verified independently. Catalogue dimensions (p39): wheel diameter 150 mm, tread width 50 mm, top plate 113 x 140 mm with FOUR Ø13 bolt holes at 75 x 105 mm centres - this series publishes hole centres, so the four mounting holes ARE modelled (verified as open through-holes by ray checks). Mount height: catalogue p39 lists 225 mm; the website mounting-height field is left as-is pending confirmation of the field value (not filled from the model). 安装孔:本系列公布孔距,已建模 4 个 Ø13、孔距 75×105(实测贯通);安装高:目录 p39 列 225 mm,官网安装高字段按既定口径保留待确认,不以模型总高填入。 STATIC OUTER-FORM REFERENCE MODEL: this model is built from the catalogue photo (p39) as a STATIC outer-form reference. The internal damper mechanism is NOT represented; spring rate, travel, damping performance and service life are NOT verified and NOT claimed. 本模型是依据目录 p39 产品图建立的静态外形参考模型;内部减震机构未表达;刚度、行程、减震效果与寿命均未验证、不作宣称。 DAMPER HEAD (visible parts only): box-shaped housing (REF) with a shallow side recess; a DARK RING keeps a NEUTRAL name: its material, its purpose and whether it bears load are all UNCONFIRMED and the model does not assert any of them. All damper dimensions are REF, not a confirmed standard part. Not built: full internal mechanism, travel, wall thickness. 减震头仅建可见部分:盒状壳体(REF)、侧面浅凹、深色环状件(中性命名,材料/用途/是否承载均未确认);减震头尺寸全部为 REF,非已确认标准件;内部机构完整还原、行程、壁厚未建。BRACKET FINISH: the checked materials confirm the bracket finish differs from the S01 series (blue vs zinc). They do NOT confirm the remaining internal construction is identical - that is NOT asserted. The zinc shade is REF only and does not claim to reproduce a real plating finish. 支架处理:已核资料可确认与 S01 系列(蓝色)不同、为镀锌色;其余内部结构未据此确认完全相同,不作断言;锌灰色号仅为 REF,不代表已模拟真实镀层。 VISIBLE YELLOW SPRING: the catalogue photo (p39) shows a yellow coil spring through the housing side window. It is modelled as a STATIC coil (helix sweep) - NO motion, and NO claim of stiffness, travel or damping performance. mean dia Ø40, wire Ø5, 4 turns (REF), colour #E3A008 (REF), side window 26 x 44; ends tangent to their support faces - bottom end on the fork-bridge top, top end on the housing cavity top - supported on both ends, no floating (end finish is REF). 可见黄色弹簧:目录 p39 图开窗可见黄色螺旋弹簧,按静态线圈表达其外形——不做运动仿真,不宣称刚度、行程或减震性能。弹簧中径 Ø40、线径 Ø5、4 圈(均 REF),色 #E3A008(REF),侧窗 26×44;两端与支承面相切——底压桥顶、顶压内腔顶——不悬空(端部形式 REF)。 ASSEMBLY CONNECTIVITY (measured): top plate → swivel race → dark ring → housing → cross bridge → fork plates → axle, verified as real face-to-face contact, with zero interference across all 120 part pairs. This states assembly connectivity ONLY and does NOT verify load-bearing capacity, strength or damping performance. 连接链为逐段实测面贴合、120 对零件零干涉;仅表达装配连通性,不验证承重、强度或减震性能。 Wheel: red polyurethane tread over a cast-iron style core with lightening holes, per the catalogue colour note "Red wheel, zinc bracket". Colour shades are REF (the catalogue gives no colour codes). 轮体:红色 PU 胎 + 铸铁风格芯(带减重孔),配色按目录"红轮锌架";色号均为 REF。 LOAD CAPACITY: Pending confirmation - the catalogue lists 150 kg while the website shows 350 kg (signed difference website − catalogue = +200 kg; absolute difference 200 kg); the reason has not been established and confirmation is pending. 承重待确认:目录 150 kg、官网 350 kg,有符号差(官网−目录)= +200 kg,绝对差额 200 kg,原因待确认。 REFERENCE MODEL SIZES: axle Ø12 mm, envelope 189.50 x 140.00 x 225.00 mm and the 225 mm model stack height (no stem included) are reference model sizes derived from the dimension chain, NOT verified physical specifications. Other estimated items marked REF: housing wall, dark ring Ø70 x Ø46 x 5, shallow recess, damper stack height, plate thickness 8 mm, internal sleeves; the internal bearing is not modelled. These are estimates not verified against a supplier drawing - confirm all critical dimensions before design, quotation or installation. 参考模型尺寸:轴 Ø12、外框 189.50 x 140.00 x 225.00、模型总高 225(不含杆长),均为参考值、不当作实物确认规格;壳体壁厚、深色环 Ø70ר46×5、浅凹、减震叠高、板厚 8、内部轴套均为 REF;内部轴承未建模。 This model is for presentation and selection reference only, not for production, tooling or load calculations. See the README inside the STEP ZIP for details. Download GLB (3D model): http://keluonuo-caster.com/uploads/file/20261118/20261118104559d1fc39168.glb Download STEP (3D CAD model, ZIP): http://keluonuo-caster.com/uploads/file/20261118/20261118104602582d96310.zip
Wheel Diameter150 mm
Fastening Typeplate
Tread Width50 mm
CapacityPending confirmation
MaterialPolyurethane
StructureSwivel
Mount Height225
Brake TypeNone
Swivel Caster
Polyurethane Wheel
Interact and Download Native CAD models below. Rotate, zoom in/out, and see critical dimensions by utilizing your mouse.

