
Above image may be representative or a CAD rendering; see 3D model below for additional views.
PART NUMBER: KOR-L06-3
3D CAD model - KOR-L06-3 (3" Light Duty Open-Spoke PP Swivel Caster) Geometry verified independently. Catalogue dimensions: wheel diameter 75 mm, tread width 32 mm, mounting height 100 mm, top plate 92 x 62 mm, bolt hole diameter 8.5 mm (catalogue record only). Pressed-steel fork, swivel, top-plate mounting. OPEN-SPOKE WHEEL / 开口辐条轮: The catalogue describes "an open-spoke polypropylene wheel — light in weight, easy to clean, suited to equipment where debris falls through the wheel". In this reference model FIVE THROUGH-POCKETS are cut between the hub and the rim, and the through-cut was verified by along-axis ray penetration checks on both the delivered GLB and STEP (each pocket is genuinely open, not a shallow face recess). The five pockets are spaced 72° apart; their count, width and shape are marked REF — the catalogue gives no spoke count, pocket width or pocket shape. 轮芯与轮缘之间开 5 个贯通槽口(已实测贯通,非浅凹槽);槽口数量/宽度/形状均为 REF,目录未给出。 TWO-COLOUR WHEEL / 双色轮: Catalogue wording "Black core, yellow tread". The catalogue specifies the wheel material as PP ("open-spoke polypropylene wheel"), with the colouring described as black core / yellow tread; the internal material composition is not further specified — the colouring is a catalogue presentation, not a statement about material composition. Colour codes #1F1F1F (core) and #D8A518 (tread) are marked REF; the catalogue gives no colour codes. 目录轮材为PP、配色为黑芯黄胎;内部材料构成未进一步说明;色号为 REF。 LOAD CAPACITY: 75 kg per caster — the catalogue and the website agree (confirmed value). 承重 75 kg/只,目录与官网一致(确认值)。 MOUNTING HOLES: NOT modelled - the hole layout is pending confirmation. The catalogue lists hole centres as "-" for all three sizes; only the bolt hole diameter of 8.5 mm is recorded as a catalogue value. The top plate is a plain 92 x 62 x 4.5 mm plate; no single-centre-hole assumption is made. 安装孔未建模、布局待确认。 REFERENCE MODEL SIZES: the 66 mm axle total length and the 109.5 x 66.0 x 100.0 mm envelope (fore-aft x width x height) are reference model sizes derived from the dimension chain, NOT catalogue outline values. Other estimated items marked REF: plate thickness 4.5 mm, fork-to-wheel clearance 2.0 mm per side, fork 3.0 mm plate + 3.0 mm folded edge (6.0 mm face), axle dia. 8, M8 schematic fasteners, swivel race 34 mm, dust seal 42 mm, bridge 32.4 mm, internal sleeves and bearing details. These are estimates not verified against a supplier drawing - confirm all critical dimensions before design, quotation or installation. The internal bearing assembly is not modelled. This model is for presentation and selection reference only, not for production, tooling or load calculations. See the README inside the STEP ZIP for details. Download GLB (3D model): http://keluonuo-caster.com/uploads/file/20261113/20261113093510f92ae9834.glb Download STEP (3D CAD model, ZIP): http://keluonuo-caster.com/uploads/file/20261113/20261113093513ad4985059.zip
Wheel Diameter75 mm
Fastening Typeplate
Tread Width32 mm
Capacity75 kg
MaterialBlack/Yellow PP
StructureSwivel
Mount Height100
Brake TypeNone
Swivel Caster
Black/Yellow PP Wheel
Interact and Download Native CAD models below. Rotate, zoom in/out, and see critical dimensions by utilizing your mouse.

