KOR-L05-3

Above image may be representative or a CAD rendering; see 3D model below for additional views.

PART NUMBER: KOR-L05-3

3D CAD model - KOR-L05-3 (3" Light Duty Globe-Tread Red PP Swivel Caster) Geometry verified independently. Catalogue dimensions: wheel diameter 75 mm, tread width 32 mm, mounting height 100 mm, top plate 92 x 62 mm, bolt hole diameter 8.5 mm (catalogue record only). Material: red polypropylene (Red PP), no brake. Pressed-steel fork, swivel, top-plate mounting. GLOBE-TREAD / 弧面轮廓: The catalogue describes "a polypropylene wheel with a contoured globe-style tread face and a moulded centre hub". In this reference model the tread face is a smooth, continuous domed CROWN across the full tread width - a single revolved curved profile (measured radial drop 1.8 mm at the shoulder and 4.5 mm at the side edge). The crown curvature, the hub diameter (26 mm) and hub length (32 mm), the red shade #C8102E and all internal details are marked REF: the catalogue gives no crown radius, no hub dimensions and no colour code, so these are reference modelling assumptions, not measured values. 胎面为跨轮宽的连续弧面轮廓(Globe-Tread),属单一回转曲面;弧度、毂尺寸、色值与内部细节均为 REF。 MOULDED CENTRE HUB / 中心毂: The centre hub is actually raised in the geometry - it protrudes 8 mm beyond each wheel-disc face (hub 26 mm diameter x 32 mm long). It is part of the SAME red PP wheel body, NOT a separate core material and NOT a different-material wheel core. The internal bearing, the schematic sleeves and the bearing seats are REF details only; the internal bearing assembly is not modelled. 模压中心毂为同一红色 PP 轮体上的凸台,不解释为独立材质轮芯。 LOAD CAPACITY: 75 kg per caster (confirmed - the catalogue and the website agree). Signed difference (website - catalogue) = 0 kg; absolute difference = 0 kg. MOUNTING HOLES: NOT modelled - the hole layout is pending confirmation. The catalogue lists hole centres as "-" for all three sizes; only the bolt hole diameter of 8.5 mm is recorded as a catalogue value. The top plate is a plain 92 x 62 x 4.5 mm plate; no single-centre-hole assumption is made. 安装孔未建模、布局待确认。 REFERENCE MODEL SIZES: the 66 mm axle total length and the 109.5 x 66.0 x 100.0 mm envelope (fore-aft x width x height) are reference model sizes derived from the dimension chain, NOT catalogue outline values. Other estimated items marked REF: plate thickness 4.5 mm, fork-to-wheel clearance 2.0 mm per side, fork 3.0 mm plate + 3.0 mm folded edge (6.0 mm face), axle stub beyond the nut 2.0 mm, M8 schematic fasteners (axle dia. 8, nut across-flats 13, nut 5 thick, washer 2), swivel race 34 mm, dust seal 42 mm, bridge 32.4 mm, closed wheel face and colour shades. These are estimates not verified against a supplier drawing - confirm all critical dimensions before design, quotation or installation. This model is for presentation and selection reference only, not for production, tooling or load calculations. See the README inside the STEP ZIP for details. Download GLB (3D model): http://keluonuo-caster.com/uploads/file/20261112/20261112164322f0c215429.glb Download STEP (3D CAD model, ZIP): http://keluonuo-caster.com/uploads/file/20261112/20261112164325b78f01381.zip

Wheel Diameter75 mm

Fastening Typeplate

Tread Width32 mm

Capacity75 kg

MaterialRed PP

StructureSwivel

Mount Height100

Brake TypeNone

Swivel Caster

Red PP Wheel

CAD

Interact and Download Native CAD models below. Rotate, zoom in/out, and see critical dimensions by utilizing your mouse.

Loading 3D model…
Drag to rotate · Scroll to zoom · Right-drag to pan
KOR-L05-3