
Above image may be representative or a CAD rendering; see 3D model below for additional views.
PART NUMBER: KOR-L03-3
3D CAD model - KOR-L03-3 (3" Light Duty TPR Swivel Caster) Geometry verified independently. Catalogue dimensions: wheel diameter 75 mm, tread width 32 mm, mounting height 100 mm, top plate 92 x 62 mm, bolt hole diameter 8.5 mm (catalogue record only). Wheel material: thermoplastic rubber (TPR), as stated in the catalogue. The internal wheel-core construction is NOT confirmed - the catalogue gives no information about a separate core, its material or any hole pattern. In this reference model the inner and outer zones are shown in the SAME grey shade and NO lightening holes are modelled; this is a REFERENCE modelling assumption only, NOT a statement that the physical product is a single-material wheel. Confirm the core structure against same-model photos or factory drawings before use. 轮材为 TPR(目录);内部轮芯结构待确认;胎芯同色、无减重孔仅为参考建模方案(REF),不代表实物已确认为单一材质。Pressed-steel fork, swivel, top-plate mounting, no brake. LOAD CAPACITY: 75 kg per caster (confirmed - the catalogue and the website agree). Signed difference (website - catalogue) = 0 kg; absolute difference = 0 kg. MOUNTING HOLES: NOT modelled - the hole layout is pending confirmation. The catalogue lists hole centres as "-" for all three sizes; only the bolt hole diameter of 8.5 mm is recorded as a catalogue value. The top plate is a plain 92 x 62 x 4.5 mm plate; no single-centre-hole assumption is made. REFERENCE MODEL SIZES: the 66 mm axle total length and the 109.5 x 66.0 x 100.0 mm envelope (fore-aft x width x height) are reference model sizes derived from the dimension chain, NOT catalogue outline values. Other estimated items marked REF: plate thickness 4.5 mm, fork-to-wheel clearance 2.0 mm per side, fork 3.0 mm plate + 3.0 mm folded edge (6.0 mm face), axle stub beyond the nut 2.0 mm, M8 schematic fasteners (axle dia. 8, nut across-flats 13, nut 5 thick, washer 2), swivel race 34 mm, dust seal 42 mm, tread thickness 10.0 mm = (75 - 55)/2 (REF), core diameter 55 mm as an internal modelling diameter (REF), colour shades and the fork outline. These are estimates not verified against a supplier drawing - confirm all critical dimensions before design, quotation or installation. The internal bearing assembly is not modelled. This model is for presentation and selection reference only, not for production, tooling or load calculations. See the README inside the STEP ZIP for details. Download GLB (3D model): http://keluonuo-caster.com/uploads/file/20261112/2026111211570150d6d3620.glb Download STEP (3D CAD model, ZIP): http://keluonuo-caster.com/uploads/file/20261112/20261112115703c84bd3067.zip
Wheel Diameter75 mm
Fastening Typeplate
Tread Width32 mm
Capacity75 kg
MaterialGrey TPR
StructureSwivel
Mount Height100
Brake TypeNone
Swivel Caster
Grey TPR Wheel
Interact and Download Native CAD models below. Rotate, zoom in/out, and see critical dimensions by utilizing your mouse.

