KOR-L02-3

Above image may be representative or a CAD rendering; see 3D model below for additional views.

PART NUMBER: KOR-L02-3

3D CAD model - KOR-L02-3 (3" Light Duty Iron-Core PU Swivel Caster) Geometry verified independently. Catalogue dimensions: wheel diameter 75 mm, tread width 32 mm, mounting height 100 mm, top plate 92 x 62 mm, bolt hole diameter 8.5 mm (catalogue record only). REAL two-material wheel: a cast-iron core with a red polyurethane tread - the tread/core split is a physical material boundary, not a colour modelling zone. The 6-hole lightening pattern on the iron core is a REF modelling assumption (count and pattern not verified against a drawing). Reinforced pressed-steel fork, swivel, top-plate mounting, no brake. LOAD CAPACITY: PENDING CONFIRMATION - the catalogue states 90 kg per caster while the website states 100 kg. Difference 10 kg; the reason for the disagreement is not established, so no single rating is published here. MOUNTING HOLES: NOT modelled - the hole layout is pending confirmation. The catalogue lists hole centres as "-" and no product/installation drawing shows the pattern; only the bolt hole diameter of 8.5 mm is recorded as a catalogue value. The top plate is a plain 92 x 62 x 4.5 mm plate; no single-centre-hole assumption is made. REFERENCE MODEL SIZES: the 68 mm axle total length and the 109.5 x 68.0 x 100.0 mm envelope (fore-aft x width x height) are reference model sizes derived from the dimension chain, NOT catalogue outline values. Other estimated items marked REF: plate thickness 4.5 mm, fork-to-wheel clearance 2.0 mm per side, reinforced fork 3.5 mm plate + 3.5 mm folded edge (7.0 mm face), axle stub beyond the nut 2.0 mm, M8 schematic fasteners (axle dia. 8, nut across-flats 13, nut 5 thick, washer 2), swivel race 34 mm, dust seal 42 mm, tread thickness 9.0 mm = (75 - 57)/2, tread fillet 3.0 mm, colour shades and the lightening-hole pattern. These are estimates not verified against a supplier drawing - confirm all critical dimensions before design, quotation or installation. The internal bearing assembly is not modelled. This model is for presentation and selection reference only, not for production, tooling or load calculations. See the README inside the STEP ZIP for details. Download GLB (3D model): http://keluonuo-caster.com/uploads/file/20261111/20261111180244ebff85131.glb Download STEP (3D CAD model, ZIP): http://keluonuo-caster.com/uploads/file/20261111/202611111802478befb6479.zip

Wheel Diameter75 mm

Fastening Typeplate

Tread Width32 mm

CapacityPending confirmation

MaterialRed PU / Cast iron core

StructureSwivel

Mount Height100

Brake TypeNone

Swivel Caster

Red PU / Cast iron core Wheel

CAD

Interact and Download Native CAD models below. Rotate, zoom in/out, and see critical dimensions by utilizing your mouse.

Loading 3D model…
Drag to rotate · Scroll to zoom · Right-drag to pan
KOR-L02-3