KOR-I02-6

Above image may be representative or a CAD rendering; see 3D model below for additional views.

PART NUMBER: KOR-I02-6

3D CAD model - KOR-I02-6 (p34, 150 mm integral swivel caster, bolt-hole stem) Geometry verified independently. Catalogue dimensions (p34): wheel diameter 150 mm, tread width 45 mm, stem-mount caster (bolt-hole stem): TUBULAR stem Ø32 x 90 mm with a TRANSVERSE hole near its top (the catalogue gives the stem diameter and length; the hole is modelled where the photo shows it - it is visible on the near wall, and whether it passes through the far wall is NOT evidenced and NOT asserted; wall thickness and hole size/position are REF). The serrated swivel rim IS modelled per the photo as 28 inward tooth slots (tooth count and depth are REF; the rim envelope is kept), and the radiating recessed wheel-face ribs seen in the photo ARE modelled (rib count/width REF). Mount height: the catalogue gives NO mounting height, so none is stated - the website mounting-height field is left as-is. 目录 p34:轮径 150 mm、胎宽 45 mm、管状杆 Ø32×90 顶部横向孔(杆径/杆长为目录值;孔按产品图可见于近壁单侧,是否贯通两侧无图证、不作宣称;壁厚与孔径/孔位 REF);锯齿转盘已按图证建模为 28 个内切齿槽(齿数/齿深 REF,外缘包络保持);轮面放射凹筋已按图证建模(筋数/筋宽 REF);目录未给安装高,官网安装高字段保留不动。 STATIC OUTER-FORM REFERENCE MODEL: this model is built from the catalogue photo as a STATIC outer-form reference. It is NOT a load-rated engineering model; strength and service life are NOT verified and NOT claimed. 本模型是依据目录产品图建立的静态外形参考模型;不承载重工程含义,强度与寿命均未验证、不作宣称。 STEM AND JOINTS: stem → swivel race as face-to-face contact; swivel race → fork is a REFERENCE WELD construction (the photo shows the fork emerging from below the swivel head, but the actual weld detail is not visible and remains UNCONFIRMED - the model keeps a NEUTRAL reference construction and does not assert a specific weld type). The internal swivel mechanism (races, bearings) is NOT represented in detail; zero interference across all 78 part pairs, with the weld pairs exempted as reference construction. This states assembly connectivity ONLY and does NOT verify load-bearing capacity or strength. 杆与连接:杆与转盘面贴合;转盘与叉架为焊接表达(REF 构造,真实焊缝不可见、未确认,模型保持中性表达、不宣称具体焊型);内部转向机构(转盘、轴承)细节未表达;78 对零件零干涉(焊接对按 REF 构造豁免);仅表达装配连通性,不验证承重或强度。 Wheel: catalogue states "One-piece moulded polypropylene wheel"; the model colour is the deep red/burgundy shade per the photo (exact shade REF). 轮体:目录「整体模压 PP 轮」;模型按产品图取酒红色(具体色号 REF)。 LOAD CAPACITY: Pending confirmation - the catalogue lists 220 kg while the website shows 150 kg (signed difference website − catalogue = -70 kg; absolute difference 70 kg); the reason has not been established and confirmation is pending. 承重待确认:目录 220 kg、官网 150 kg,有符号差(官网−目录)= -70 kg,绝对差额 70 kg,原因待确认。 REFERENCE MODEL SIZES: envelope 152.00 x 89.00 x 257.00 mm and the 257 mm reference overall height (which INCLUDES the 90 mm stem under the reference reading) are reference model sizes derived from the dimension chain, NOT verified physical specifications. Other estimated items marked REF: stem wall thickness, transverse hole Ø8 at 12 mm from the stem top (single-side disclosure as above), serrated tooth depth/width, rib count/width; the internal bearing is not modelled. These are estimates not verified against a supplier drawing - confirm all critical dimensions before design, quotation or installation. 参考模型尺寸:外框 152.00 x 89.00 x 257.00、参考总高 257(含参考取法下的 90 mm 杆长),均为参考值、不当作实物确认规格;杆壁厚、横孔 Ø8/离顶 12(单侧开孔口径)、齿深/齿宽、筋数/筋宽均为 REF;内部轴承未建模。 This model is for presentation and selection reference only, not for production, tooling or load calculations. See the README inside the STEP ZIP for details. Download GLB (3D model): http://keluonuo-caster.com/uploads/file/20261119/20261119093034f081f0542.glb Download STEP (3D CAD model, ZIP): http://keluonuo-caster.com/uploads/file/20261119/202611190930371f2f46852.zip

Wheel Diameter150 mm

Fastening Typestem

Tread Width45 mm

CapacityPending confirmation

StructureSwivel

Brake TypeNone

Swivel Caster

CAD

Interact and Download Native CAD models below. Rotate, zoom in/out, and see critical dimensions by utilizing your mouse.

Loading 3D model…
Drag to rotate · Scroll to zoom · Right-drag to pan
KOR-I02-6